Apexia Metal

APEXIA METAL Manufacture Light Series Pipe Clamps in India.

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)
• Delivery Time: READY STOCK

APEXIA METAL 5 Valve Manifold Flange to Flange connection design for connecting system impulse lines and transmiffers. This valve consist to 1/2" NPT Female connections on 54 mm (2-1/8") centres and of Two equalizer valves, Two block valves and One vent valve. 

DESIGN FEATURES

1. Forged one piece body construction for higher strength.
2. Two isolation and one equalizing valve for instrument balancing applications.
3. Accurate and fine control of venting.
4. Metal to metal body bonnet seal for higher pressure and temperature sealing.
5. Temperature rating -50°C TO 230°C.
6. Mounting holes are standard to allow easy fixing to pipe stands and enclosure.
7. Non rotating Vee/Ball tip design.
8. Full material traceability.
9. Material of construction can be supplied to meet the requirement of NACE MR-01-75.

Product Description

APEXIA METAL 5 Valve Manifold Pipe to Flange design for connecting system impulse lines and transmitters. This valve consist Pipe to Flange connections with Teflon/Viton 0-Ring packing on 54 mm. (2-1/8") centre's to suit the inlet connection. This Valve provides two instrument isolating valves, Two equalizer valves and One bleed valve. (For Testing).

DESIGN FEATURES

1. Forged one piece body construction for higher strength.
2. Two isolation and one equalizing valve for instrument balancing applications.
3. Accurate and fine control of venting.
4. Metal to metal body bonnet seal for higher pressure and temperature sealing.
5. Temperature rating -50°C TO 230°C.
6. Mounting holes are standard to allow easy fixing to pipe stands and enclosure.
7. Non rotating Vee/Ball tip design.
8. Full material traceability.
9. Material of construction can be supplied to meet the requirement of NACE MR-01-75.

AM 2 Valve Manifold direct mount are mainly used in gauge and static instrument applications such as pressure switches, pressure transmitter and manometers. The manifold will isolate instrumentation from the process and allow venting of instrument for calibration, removal from the circuit without affecting the process/ application and or recovery of the sample etc.

DESIGN FEATURES

1. Forged one piece body construction for higher strength.
2. Offset vent valve for ease of operation.
3. Accurate and fine control of venting.
4. Metal to metal body bonnet seal for higher pressure and temperature sealing.
5. Temperature rating -50°C TO 230°C.
6. Mounting holes are standard to allow easy fixing to pipe stands and enclosure.
7. Non rotating Vee/Ball tip design.
8. Full material traceability.
9. Material of construction can be supplied to meet the requirement of NACE MR-01-75.

Owing to huge support of our team members, we are offering our patrons a qualitative collection of Tube Clamps. Our vendors use finest metal for processing these tube clamps under the direction of experts.

Specifications:

• Temperature Range: Upto 400 Degreec
• Size: Customized
• Brand : KE

Features:

• Light weight
• Precise dimensions
• Anti corrosive

APEXIA METAL Manufacture Hydraulic Tube Clamps In Ind
Owing to huge support of our team members, we are offering our patrons a qualitative collection of Tube Clamps. Our vendors use finest metal for processing these tube clamps under the direction of experts.

Specifications:

• Temperature Range: Upto 400 Degreec
• Size: Customized
• Brand : KE

Features:

• Light weight
• Precise dimensions
• Anti corrosive

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: Nhava Sheva
• Production Capacity: 50000 pcs p.m.
• Delivery Time: READY STOCK

Manufacturers Exporters of Brass Ferrule Fittings in India.

Types of Brass Ferrule Fittings:

• Brass Straight Union
• Brass Bulk Head Union
• Brass Reducing Union
• Brass Union Elbow
• Brass Union Tee
• Brass Male Elbow
• Brass Male Tee
• Brass Male Connector
• Brass Female Connector
• Brass Insert

Manufacturers Exporters of Brass Ferrule Fittings in India.

Types of Brass Ferrule Fittings:

• Brass Straight Union
• Brass Bulk Head Union
• Brass Reducing Union
• Brass Union Elbow
• Brass Union Tee
• Brass Male Elbow
• Brass Male Tee
• Brass Male Connector
• Brass Female Connector
• Brass Insert

Manufacturers Exporters of Brass Ferrule Fittings in India.

Types of Brass Ferrule Fittings:

• Brass Straight Union
• Brass Bulk Head Union
• Brass Reducing Union
• Brass Union Elbow
• Brass Union Tee
• Brass Male Elbow
• Brass Male Tee
• Brass Male Connector
• Brass Female Connector
• Brass Insert

We manufacture cup washers in every material such as Brass, Copper, Aluminium, Fibre, Mild Steel (M.S.), Stainless Steel ( Grade 201,202,304,316, 316L, 400 etc), Carbon Steel, Spring Steel, High Tensile Steel, Rubber, Plastic, Teflon, Berrylium Copper, Haste Alloy, Alloy steel, Monel Etc. Washers are available as per Din, Indian Standards (I.S.), Japanese Standards (J.S.), British Standards (B.S.) American Standards. Special Washers can be manufactured as per I.D., O.D. thickness requirement, as per your drawing or as per the sample you provide.
These are similar to Disc washers.

AM 2 Valve Manifold direct mount are mainly used in gauge and static instrument applications such as pressure switches, pressure transmitter and manometers. The manifold will isolate instrumentation from the process and allow venting of instrument for calibration, removal from the circuit without affecting the process/ application and or recovery of the sample etc.

DESIGN FEATURES

1. Forged one piece body construction for higher strength.
2. Offset vent valve for ease of operation.
3. Accurate and fine control of venting.
4. Metal to metal body bonnet seal for higher pressure and temperature sealing.
5. Temperature rating -50°C TO 230°C.
6. Mounting holes are standard to allow easy fixing to pipe stands and enclosure.
7. Non rotating Vee/Ball tip design.
8. Full material traceability.
9. Material of construction can be supplied to meet the requirement of NACE MR-01-75

As an acclaimed enterprise of the industry, we are involved in offering a broad range of Mild Steel Fittings. Widely use in industry like chemical processing, petrochemical, oil refineries, the offered steel fitting is manufactured as per with quality norms. We ensure the whole range of steel fitting on numerous quality parameters so as to deliver a flawless range. Our steel fitting is provided in numerous sizes and inner/outer diameters as per the need at affordable rates.

Features:

• Highly durable
• Easy to use
• Dimensional accuracy

We manufacture cup washers in every material such as Brass, Copper, Aluminium, Fibre, Mild Steel (M.S.), Stainless Steel ( Grade 201,202,304,316, 316L, 400 etc), Carbon Steel, Spring Steel, High Tensile Steel, Rubber, Plastic, Teflon, Berrylium Copper, Haste Alloy, Alloy steel, Monel Etc. Washers are available as per Din, Indian Standards (I.S.), Japanese Standards (J.S.), British Standards (B.S.) American Standards. Special Washers can be manufactured as per I.D., O.D. thickness requirement, as per your drawing or as per the sample you provide.
These are similar to Disc washers.

Owing to our expertise in this domain, we are involved in offering a broad range of Forged Pipe Fitting. Use in industries such as refineries, steel, construction sites, the offered pipe fitting is manufactured by our professionals by utilizing the top quality material and sophisticated technology as per with the set quality norms. We provide this pipe fitting in numerous specifications as per with the need of customers.

Features:

• Less maintenance
• Easy to use
• Longer service life

Specifications:

• Range : 15 mm NB up to 100 mm NB in 2000 LBS, 3000 LBS, 6000 LBS & 9000 LBS, 150 LBS, 250 LBS

Socket Weld Fittings:

• Forms : Elbow 90 deg, Elbow 45 deg, Cross, Tee, Coupling and Half Coupling & Cap.

Stainless Steel:

• Grade : 304, 304L, 304H, 309, 310, 310S, 316, 316Ti, 316 L , 317, 317L, 321, 347, 347 H, 904L

Duplex Steel:

• Grade : 2205 (UNS No. S31803), 2207 (UNS No. S32760)

Nickel Alloy:

• Grade : Nickel 200 (UNS No. N02200), Nickel 201 (UNS No. N02201), Monel 400 (UNS No. N04400),
• Monel 500 (UNS No. N05500)
• Inconel 800 (UNS No. N08800), Inconel 825 (UNS No. N08825), Inconel 600 (UNS No. N06600), Inconel 625 (UNS No. N06625), Inconel 601 (UNS No. N06601)
• Hastelloy C 276 (UNS No. N10276)
• Alloy 20 (UNS No. N08020)
• Titanium (Grade I & II)

Copper Alloy:

• Grade : UNS No. C 10100, 10200, 10300, 10800, 12000, 12200, 70600, 71500 UNS No. C 70600 (Cu -Ni- 90/10), C 71500 (Cu -Ni- 70/30)

We manufacture cup washers in every material such as Brass, Copper, Aluminium, Fibre, Mild Steel (M.S.), Stainless Steel ( Grade 201,202,304,316, 316L, 400 etc), Carbon Steel, Spring Steel, High Tensile Steel, Rubber, Plastic, Teflon, Berrylium Copper, Haste Alloy, Alloy steel, Monel Etc. Washers are available as per Din, Indian Standards (I.S.), Japanese Standards (J.S.), British Standards (B.S.) American Standards. Special Washers can be manufactured as per I.D., O.D. thickness requirement, as per your drawing or as per the sample you provide.
These are similar to Disc washers.