Call 08048977088 79% Response Rate

our range

Inconel Fasteners

We are a leading Manufacturer of incoloy 800 alloy 800 uns n08800 fasteners, inconel 600 alloy 600 uns n06600 fastener, inconel 718 uns no 07718 fasteners, inconel 625 alloy uns n06625 fasteners and incoloy 825 alloy 825 uns n08825 fasteners from Mumbai, India.
Incoloy 800 Alloy 800 Uns N08800 Fasteners

Incoloy 800 Alloy 800 Uns N08800 Fasteners

Rs 100  / PieceGet Best Price
Material GradeINCONEL 400
MaterialINCONEL
GradeINCONEL
Usage/ApplicationAM
Size/DiameterAM
BrandAM

Alloy 800 is a variation of Inconel superalloys. These are super austenitic stainless steel materials. There are silicon, molybdenum, copper, nitrogen and other elements in addition to the chromium, nickel iron base of the alloy. They are very much corrosion resistant under various environments and exhibit high strength under high temperatures. The Incoloy 800H has 0.2% titanium in its composition and is used in specific applications. The applications include heat exchangers, process piping, furnace components, electric range heating element sheathing and ammonia effluent coolers. The Alloy 800H is also used in extruded tubing in ethylene furnaces and in steam methane forming furnaces. The Incoloy 800HT contains 0.5% titanium in the composition. As a result, the Alloy 800HT has higher creep resistance and strength than the 800H. The Incoloy 800 chemical composition makes it oxidation resistant and carburization resistant under high temperatures. The alloy can be exposed to high temperatures for long time without compromising the austenitic properties of the materials. The Inconel 800 heating element is made up of this alloy and can last longer. The material is used to produce accessories in heat exchangers, carburizing equipment, heating elements and sheathing. The use of the alloy in nuclear steam generator tubing is also common. The Incoloy 800 density is around 7.94 grams per cubic centimeter. The Incoloy 800 temperature range is very impressive ranging from cryogenic temperatures all the way to high temperatures. The alloy gets work hardened during machining. Welding is possible with a matching filler metal. Conventional methods could be applied when forming this material due the good ductility of the alloy. With standard tooling, cold working is possible on Inconel 800. The Incoloy 800 Price could be inquired by contacting us. The Incoloy 800 suppliers sell different products, forms, shapes and grades in different prices and the prices could fluctuate based on market conditions as well.

View Complete details

get quote request a call back
  • Inconel 600 Alloy 600 Uns N06600 Fastener
  • Inconel 600 Alloy 600 Uns N06600 Fastener
Inconel 600 Alloy 600 Uns N06600 Fastener

Inconel 600 Alloy 600 Uns N06600 Fastener

Rs 100  / KgGet Best Price
MaterialInconel
BrandAM
SizeM4 - M 50
Material GradeInconel 600 / Uns N06600
GradeInconel 600 / Uns N06600
TypeHex Bolt
Inconel 600 applications include furnace retort seals, fixtures and fans, roller hearths in carbon nitriding processes, radiant tubes, reactor vessels, heat exchanger tubes and other components in vinyl chloride production and in thermocouple sheaths and others. Inconel 600 is a chromium nickel superalloy that contains carbon, manganese, chromium, silicon, sulfur and iron in its composition. It is a strong and hard alloy that is resistant to most acidic conditions and has very high temperature and pressure resistance. The material is nonmagnetic and could be welded upon.

View Complete details

get quote request a call back
Inconel 718 Uns No 07718 Fasteners

Inconel 718 Uns No 07718 Fasteners

Rs 100  / KgGet Best Price
MaterialINCONEL
Usage/ApplicationChemical Handling
SizeM3-M22
Material GradeInconel 718, Nickel 718, Alloy 718, Nicrofer 5219, Alvac 718, Haynes 718, Altemp 718.
GradeInconel 718, Nickel 718, Alloy 718, Nicrofer 5219, Alvac 718, Haynes 718, Altemp 718.
TypeBolt / Nut / Washer / Stud
BrandAM
Alloy 718 is a member of Inconel alloys which are chromium nickel superalloys. These are a family of superalloys that are resistant to most acid and dry gases at room temperature. The alloys perform well under very high temperatures are and corrosion resistant. They are resistant inside and outside water. Therefore most of these alloys could be used in sea water and marine environments. The Inconel 718 UNS N07718 has excellent tensile strength and impact strength. Therefore it could be used in applications that require strength and corrosion resistant. The alloy is designated by the standard DIN 2.4668. The material composition includes carbon, manganese, phosphorus, sulfur and silicon in addition to nickel and chromium. This is a low carbon version of the alloys with the allowed maximum carbon content is up to 0.08% of the composition. The Inconel 718 price fluctuates depending on the products and a full list could be obtained from us. The material can perform in lower cryogenic temperatures up to very high temperatures. The corrosion resistance is improved by the addition of 1% cobolt in the composition. The corrosion resistance and high temperature resistance properties land the alloy in the jet engine components and gas turbine blades. The alloy is produced through solid solution annealed conditions and therefore the Inconel 718 hardness is superior. The Inconel 718 heat treatment lasts for one hour at 982 degrees Celsius and the precipitation treatment lasts for 8 hours under 718 degrees Celsius. The Inconel 718 applications could be seen in the chemical, petrochemical, aerospace and marine applications. Although it could be used interchangeably with other grades of the Inconel superalloys, it is specifically used to produce components of jet engines and gas turbines. 

View Complete details

get quote request a call back
Inconel 625 Alloy Uns N06625 Fasteners

Inconel 625 Alloy Uns N06625 Fasteners

Rs 100  / PieceGet Best Price
SizeM4-M20
Thread TypeFull Thread
MaterialINCONEL
Usage/ApplicationIndustrial
ShapeHexagonal
Inconel 625, Alloy 625, Nickel 625, Chornin 625, Altemp 625, Nickelvac 625, Haynes 625, Nicrofer® 6020.
Alloy 625 is a member of Inconel alloys. Inconel alloys are superalloys of chromium and nickel. They perform well under elevated temperatures and high pressure environments. They are very much corrosion resistant. They are resistant to oxidation and reduction, most acids, dry gases under room temperature and are very strong materials in general. There are different grades of the alloy such as the Alloy 625 Grade 1 and the Alloy 625 Grade 2 which could be used interchangeably. The alloy 625  is very much corrosion resistant inside water and outside the aqueous solutions. This property makes it used in nuclear and sea water applications as well. It is much creep resistant than its counterparts. For this reason, the Alloy 625 applications can use heavy welding and yet be pitting and creep corrosion resistant.

View Complete details

get quote request a call back
Incoloy 825 Alloy 825 Uns N08825 Fasteners

Incoloy 825 Alloy 825 Uns N08825 Fasteners

Rs 100  / PieceGet Best Price
MaterialIncoloy
SizeM3-M22
Material GradeNickel 825, Incoloy 825, Nickelvac 825, Alloy 825, Nicrofer 4241 NACE MR-0175/ ISO 15156
GradeNickel 825, Incoloy 825, Nickelvac 825, Alloy 825, Nicrofer 4241 NACE MR-0175/ ISO 15156
TypeHEX BOLT / NUT
Alloy 825 is a highly corrosion resistant superalloy of chromium and nickel. The alloy has a stable microstructure that has enough nickel to resist chloride ion corrosion cracking. Resistance against acids and inducing agents are brought about by the addition of copper and molybdenum in the composition. The Incoloy 825 UNS N08825 is also resistant to oxidation, nitrates and oxidizing salts because of the addition of the chromium content. The alloy could be welded and heated in the critical sinsitisation temperature range of 650 degrees to 760 degrees Celsius without forming intergranular precipitation. This is possible because of the stabilization by the addition of titanium into the composition. The designation DIN 2.4858 used most in the sulfuric acid service applications because it is resistant to sulfuric and phosphoric acid corrosions. The material is solid solution annealed and the Incoloy 825 hardness is superior. Due to the hardness provided by the Incoloy 825 chemical composition and the heat treatment methods, the material could be used in high temperature applications such as turbine blades and jet engines as well. The Incoloy 825 properties allow it to be used in pressure vessels which undergo high pressures and have to be stronger and hard. The Incoloy 825 density is 8.14grams per centimeter cube and the melting point is 1400 degrees Celsius. This makes the alloy perform easily under very high temperatures where other elements could not be used. We offer a comprehensive Incoloy 825 price list that suits for all kinds of products and various applications. The applications of the Incoly 825 materials are seen in expansion bellows, power plants and power station ash hoppers, marine exhaust systems, ammonium sulphate vessels, electrostatic precipitator elelctrodes, calorifiers, food vessels, water and seawater vessels, sulphuric acid piping, phosphoric acid evaporators and may others. The Incoloy 825 suppliers can provide products of this alloy to suit any application.

View Complete details

get quote request a call back

EXPLORE MORE CATEGORIES